Capable Classification Society Quality Authentication from LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS,Ah32 steel plate is used for shipbuiling&platform.The shipbuilding steel plate grade AH32 is the high tensile strength steel. Ah32 shipbuilding steel has good toughness properties, higher strength,strong corrosion-resistance,the processing properties,and welding properties. ASTM A131 Ah32 steel plate can be used in the manufacture of the ship's hull structure whose weight is more than 10000 tons.
AH32 Shipbuilding steel plate specification:
Thickness: 4mm to 260mm,
Width: 1200mm to 4000mm
Length: 3000mm to 18000mm.
Ah32 steel plate Chemical Composition %
Grade |
C |
Si |
Mn |
P |
S |
Als |
Ti |
Cu |
Cr |
Ni |
Mo |
AH32 |
0.18 |
0.50 |
0.90-1.60 |
0.035 |
0.035 |
0.015 |
0.02 |
0.35 |
0.20 |
0.40 |
0.08 |
Note: Generally speaking CE will be ≤ 0.40%. If the delivery condition is TMPC, the CE will be : ≤ 0.36% (thickness ≤ 50mm),≤0.38%( when the thickness >50-100). Ceq% =(C+Mn)/6+(Cr+Mo+V)/5+(Ni+Cu)/15.
Ah32 steel plate Mechanical Property
Grade |
Rm |
Re(MPa) min |
A% min |
Akv/J min |
||||||
AH32 |
440-570 |
315 |
22 |
E.T °C |
Thickness (mm) |
|||||
0 |
≤ 50 |
>50-70 |
>70-100 |
|||||||
L |
C |
L |
C |
L |
C |
|||||
31 |
22 |
38 |
26 |
46 |
31 |
Note: In the list , Rm: .tensile strength,Re: Yield strength,A%: elongation, E.T: experimental temperature,L: lengthways, C: crosswise.
Ah32 steel plate Condition Of Delivery
Grade |
Fine grains elements |
category |
The thickness of steel |
|||||
≤ 12 |
>12.5-20 |
>20-25 |
>25-35 |
>35-50 |
>50-100 |
|||
AH32 |
Nb+V or V |
Plate/ |
A(50) |
N(50),CR(50),TM(50) |
N(50),CR(25),TM(50) |
|||
Profile steel |
N(50),CR(50),TM(50),AR*(25) |
- |
||||||
Al or Al+Ti |
Plate/ |
A(50) |
AR*(25) |
- |
||||
N(50),CR(50),TM(50) |
N(50),CR(25),TM(50) |
|||||||
Profile steel |
A(50) |
N(50),CR(50),TM(50),AR*(25) |
- |
Note: 1. delivery condition: A =Any ; N=Normalized ; CR=Control Rolled ; TM=TMPC, Temperature - deformation control rolling; AR*= Can be hot rolled with the agreement of Classification Society ; CR*=Can be control rolled with the agreement of Classification Society .
2. The Figure in the ( ) means the sampling volume to do the impact test, the unit is Ton.(-) means without impact test.
Contrast in the different standard
ASTM A131M |
TOCT 5521 |
JIS G3106 |
BS LR |
GB712 |
AH32 |
A32 |
SM490B |
AH32 |
A32 |
Ah32 steel plate Available Specification
variety |
Thickness (mm) | Width (mm) | Longth/ inner diameter (mm) | |
Shipbuilidng plate | cutting edges | 6~200 | 1500~3000 | 3000~15000 |
non- cutting edges | 1300~3000 | |||
Shipbuilidng coil | cutting edges | 1.2~19 | 1500~2000 | 760+20~760-70 |
non-cutting edges | 1510~2010 |
Ah32 steel plate theoretical weight
Thickness (mm) |
theoretical weight | Thickness (mm) | theoretical weight | ||
Kg/ft2 | Kg/m2 | Kg/ ft2 | Kg/m2 | ||
6 | 4.376 | 47.10 | 25 | 18.962 | 196.25 |
7 | 5.105 | 54.95 | 26 | 20.420 | 204.10 |
8 | 5.834 | 62.80 | 28 | 21.879 | 219.80 |
10 | 7.293 | 78.50 | 30 | 23.337 | 235.50 |
11 | 8.751 | 86.35 | 32 | 25.525 | 251.20 |
12 | 10.21 | 94.20 | 34 | 26.254 | 266.90 |
14 | 10.939 | 109.90 | 35 | 27.713 | 274.75 |
16 | 11.669 | 125.60 | 40 | 29.172 | 314.00 |
18 | 13.127 | 141.30 | 45 | 32.818 | 353.25 |
20 | 14.586 | 157.00 | 48 | 35.006 | 376.80 |
22 | 16.044 | 172.70 | 50 | 36.464 | 392.50 |
24 | 18.232 | 188.40 |
Ah32 steel plate dimensional deviation
nominal thickness(mm) |
The thickness deviation with following width (mm) | |||
≤1200 | >1200~1500 | >1500~1800 | >1800 | |
>6.0~8.0 | ±0.29 | ±0.30 | ±0.31 | ±0.35 |
>8.0~10.0 | ±0.32 | ±0.33 | ±0.34 | ±0.35 |
>10.0~12.0 | ±0.35 | ±0.36 | ±0.37 | ±0.43 |
nominal thickness(mm)
|
minus deviation (mm) | The thickness deviation with following width (mm) | |||||||||
> 1000 ~1200 | > 1200 ~1500 | > 1500 ~1700 | > 1700 ~1800 | > 1800 ~2000 | > 2000 ~2300 | > 2300 ~2500 | > 2500 ~2600 | 2600 ~2800 | > 2800 ~3000 | ||
>12~25 | -0.8 | +0.2 | +0.2 | +0.3 | +0.4 | +0.6 | +0.8 | +0.8 | +1.0 | +1.1 | +1.2 |
>25~30 | -0.9 | +0.2 | +0.2 | +0.3 | +0.4 | +0.6 | +0.8 | +0.9 | +1.0 | +1.1 | +1.2 |
>30~34 | -1.0 | +0.2 | +0.3 | +0.3 | +0.4 | +0.6 | +0.8 | +0.9 | +1.0 | +1.2 | +1.3 |
>34~40 | -1.1 | +0.3 | +0.4 | +0.5 | +0.6 | +0.7 | +0.9 | +1.0 | +1.1 | +1.3 | +1.4 |
>40~45 | -1.2 | +0.4 | +0.5 | +0.6 | +0.7 | +0.8 | +1.0 | +1.1 | +1.2 | +1.4 | +1.5 |
Gas cylinder steel plate is used in welded gas cylinder and related products. supplies gas cylinder steel with better anti-stress capability. Popular......
Moreshipbuilding steel plate suppliers,we supply A,B,D,E,AH32,DH32,EH32,FH32,AH36,DH36,EH36,FH36,AH40,DH40,EH40,FH40 with ABS,DNV,GL ....
MoreBoiler and pressure vessel grade steel comes in a variety of grades and thicknesses, and are designed to withstand the immense internal ......
MoreAlloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. ...
MoreSteel grade Q345B is the most common used as high strength low alloy structural steel in industry area. ...
MoreQ235 steel is Chinese structural steel, Q235A Q235B Q235C Q235D material density: 7.85 g/cm3, properties, specification, composition .. ..
More